Aluminium Alloy Density Index Analyzer
The aluminum alloy density index analyzer is an ideal and practical way to evaluate the effect of degassing and refinement, the quality of molten aluminum and the performance of the smelting technology.
Category:
key word:
Aluminum degassing and refinement
Service Hotline：+86-18074820425
Consult NowProduct Description
Aluminium Alloy Density Index Analyzer
Equipment Features
◆ The aluminum alloy density index analyzer is an ideal and practical way to evaluate the effect of degassing and refinement, the quality of molten aluminum and the performance of the smelting technology.
◆ High analysis speed. In the field environment, it just takes 7 minutes to analyze the quality of molten aluminum.
◆ The aluminum alloy density index analyzer judges the quality of molten aluminum by magnifying defects of molten aluminum, so it can be used to inspect the quality of molten aluminum more precisely and accurately.
◆ Detection quantification. It can eliminates the ambiguity and uncertainty of the results achieved by the conventional sample solidification state method and sample section state observation method.
◆ Eliminating alloy effect. Alloy types must be made clear when the conventional decompression density method is used to inspect the quality of molten aluminum, whereas the density calculation method to eliminate the effect of various alloys.
◆ The vacuum cover is equipped with a high-temperature-resistant, high-strength quartz glass observation window, which can be visualized the solidification of the aluminum liquid.
◆ Data is calculated and recorded automatically. This process is controlled by a microprocessor.
◆ The equipment is provided with a data printer, which can print all measured data about the vacuum density, atmospheric pressure density and density index.
◆ With a communication interface, it can be conveniently connected to the system network for collection and transmission of network data.
◆ The data can be read by an SD card and then processed statistically on a computer.
Technical Parameters
◆ Total Power: <500w
◆ Power Supply: 220v AC/50Hz
◆ Ultimate vacuum (relative to 1 standard atmosphere): -0.099MPa
◆ Adjusting range of vacuum degree: 0-0.099MPa
◆ Control accuracy of vacuum degree: ±1 kPa
◆ Sample making time: <5min
◆ Time to reach ultimate vacuum: ≤1min
◆ Maximum allowable temperature: 100℃
◆ Measured accuracy of detection density index value: <0.2
◆ Repeatability of measured density index value: <0.2 (Note: equipment detection accuracy)
◆ Maximum measurement range of electronic balance: 500g
◆ Measurement accuracy of balance: 0.001g
◆ Measurement repeatability precision of balance: ±0.001g
◆ Response time of balance measurement: ≤2S
Previous:
Next
Related products
A plate-type holding furnace is used for holding the temperature of molten aluminum during metal die casting.
Bath Type Low Pressure Casting Holding Furnace
Bath Type Low Pressure Casting Holding Furnace Equipment Characteristics ◆ The furnace body bears high pressure and high strength. The furnace shell is welded by high strength steel plate. When the test pressure is 0.25 MPa, there is no deformation on the shell. ◆The sealing performance of the furnace body is great. The furnace cover, door and rod connection are reliably sealed with the furnace body, and there is not gas leaks. ◆ No crucible loss. Non-metallic aluminium melt pool, no crucible loss, low use and maintenance costs. ◆ Liquid aluminum does not increase iron. Non-metallic molten pool, aluminum liquid without iron hyperplasia and other pollution. ◆ The melt pool has a long service life. The molten pool is casted with low cement castable for aluminum alloy, which is resistant to aluminum liquid erosion and has a service life of more than 3 years. ◆ Good insulation performance. The lining insulation adopts high-quality insulation materials such as silicon-calcium plate and nano-plate, and the temperature rise of the furnace shell surface is less than 60 °C. ◆ High temperature control precision. With the intelligent temperature control instrument and aluminum temperature thermocouple, the double loop control of aluminum liquid and furnace temperature is realized, and the temperature control accuracy reaches ± 2℃.
Bath Type Melting Furnace Equipment Features ◆ The molten pool is formed by integral injection molding with non-infiltrative and high-strength injection-resistant material (Allied Mineral), and the molten pool does not adhere to aluminum, which slows down the formation of corundum tumor. ◆ Non-metallic molten pool, liquid aluminum without iron hyperplasia and other pollution. ◆ The melt hearth service live is more than 3 years. ◆ The furnace village adopts multi-layer anti-leakage technology, without the consideration of aluminum liquid ' string leakage ' lining. ◆ The furnace cover has a cylinder rotating lift, which is convenient for molten pool cleaning, slag removal operation, furnace cover and electric heating element maintenance. ◆ It has a variety of safety protection such as aluminum liquid over-temperature alarm and furnace over-temperature alarm.
Count Pressure Casting Holding Furnace
Count Pressure Casting Holding Furnace The electrical type counter pressure furnace is made of high-quality electrical resistance wire as heating element. The furnace lining is composed of fiber module and fiber blanket, which has less heat storage and good heat preservation performance. The crucible furnace is suitable for graphite crucible. The crucible has good high temperature oxidation resistance and can be used for melt insulation before differential pressure casting. The crucible furnace is equipped with a power plug, which can be conveniently, safely and reliably connected with the power socket on the counter pressure casting machine.
MESSAGE
We will contact you within one working day. Please pay attention to your email.
ZHIYUAN
Head office:
Room 602 6/F Kai Yue Commercial Building NO.2C Argyle Street Mongkok KL HK China
Mainland office:
4th Floor, Jinlan Bay E-commerce Industrial Park, Jinhe Town, Xichuan County, Nanyang City, Henan Province
Phone:+86-18074820425
Copyright© 2024 Zhiyuan Industrial Group Co., Ltd. www.300.cn SEO This website supports IPv6 Privacy Policy